AFY type corrosion resistant pump vertical sump pump

    overview   

AFY type corrosion resistant pump vertical sump pump is a single-stage single-suction long-shaft submersible centrifugal pump. Its marking, rated performance points and flange connection size adopt ISO2858 international standard, and the technical conditions adopt ISO5199/API610 standard. Compared with the original FY type corrosion-resistant sump pump, it has the advantages of small size, high efficiency, good energy-saving effect and reliable operation. It is suitable for conveying corrosive media without solid particles and abrasive particles.

The conveying temperature of the pump is generally 0-105°C. The temperature is -20~0 °C, 105-180 °C can use thermal insulation jacket and cooling jacket, using low temperature or high temperature wear-resistant guide bearings, such cases users should explain.

If there are a small amount of solid particles in the conveying medium, the sliding bearing should be externally lubricated (water with external pressure greater than 0.2MPa and other allowable media), in which case the customer should explain.

The working pressure of the pump is designed according to 1.6MPa.

    performance   

Flow rate: 1.6-2600m³/h,

Head: 5-132m.

    Material   

According to the different media to be transported, the material of the contact liquid part of the AFY vertical sump pump can be cast steel, 1Cr18Ni9Ti, 1Cr18Ni12MoTi, 304, 316L, bronze and other materials.

The maximum submerged depth can be 5m